Dry Type Acrylic Bender Sign Letter Bender

Compared with other acrylic bending machines, this dry type bender is one new linear heater which can be used alone or with the rack and backup plate. This machine not only can bend acrylic into shapes by heating and softening the plates, but also plastic, PVC and plexiglass etc.

1. With advanced technology such as thermal insulation, space insulation, shell cooling and automatic air cooling, no need to use water pump, more simple.

2. Easy to operate, environmentally friendly and energy saving. People use it once turn on.

3. High efficiency, can work 24hrs a day without stopping and maintenance.

4. Multiple usages, can be used alone or with the rack and backup plate together.

5. Innovative design, special appearance.

6. Equipped with a guiding ruler that can make the heating are parallel.

1. The machine will produce some smoke from thermal insulation layer at first time, please set power regulator to 100 for few minutes after smoke disappear, then set power regulation around 45-65 according to operation situation.
Note: we also can remove smoke in our factory, but the heating area will have burn mark.

2. Please put the heating wire into the bottom of the heating groove if heating wire off heating groove or incorrect positioning and then operate machine.

3. Adjust the ruler to 90° angle against linear heating groove.

4. Plug power line in power outlet then the power regulation display light on, adjust it as 50-60 till heating wire to light red color.

5. Put acrylic panel one side to guiding rule and align heating position at heating groove. Waiting 20-30 seconds(May be different indoor temperature and machine setting) then the heating position soften to be bent, move acrylic panel away from machine and adjust bending angle on table. The acrylic will take shaped in few seconds.

1. Please unplug power line after work.

2. The machine heater shell can be naturally cooled under 25℃ with conventional power. 100% Heater power operation or ambient temperature is high and the case of heating temperature of the shell exceeds 50 ℃ ± 5 ℃, the heater will automatically open the air cooling and cooling device. When the temperature of the heater shell drops below 35 ℃ ± 5 ℃, the cooling device will be shut down automatically.

3.The handle sleeve and the hex wrench for heating wire replacement, please keep it properly.

Widely used in sign field, for example in school technical curriculum, architectural models, decoration project, sign letter making, wrapping corner columns, wrapping fish tank edges, doors and windows edges, display cabinet, goods shelves in supermarket, advertising lamp boxes and crafts making etc.